The
automatic pool cleaner can automatically scrub the pool wall and the bottom of the pool without draining the water, and remove the suspended solids in the water and the washed sediment through the filter. It is a new and efficient automatic swimming pool cleaning. device. In the daily use of the pool cleaning, pay attention to the following:
1. When
the automatic pool cleaner leaves the water surface (when placed on land), it must be confirmed that the power of the suction machine is off, otherwise it will cause serious damage to the suction machine.
2. The power cord must be plugged into the socket with the leakage protection device and the protection ground, and ensure that the ground wire on the socket is grounded and reliable.
3. When the
automatic pool cleaner works, it is strictly forbidden for anyone to enter the water to avoid the risk of electric shock.
4,
automatic pool cleaner before each boot, should try to discharge the gas inside the machine (no bubble or the machine completely sinks into the bottom of the pool), so as to avoid the normal operation of the suction machine due to the presence of gas.
5. The position of the float on the cable of the
automatic swimming pool cleaner can not be moved freely, so as not to affect the buoyancy, and thus affect the working posture of the suction machine.
6. Before the
automatic swimming pool cleaner is turned on, it must be confirmed whether the cable is completely in a relaxed state, so as to avoid entanglement during work, affecting the cleaning effect of the suction machine, and serious damage to the suction machine.
7. When the power is turned on, the power light will be on. When the self-test is started, it will flash. When the suction is finished, it will automatically turn off. When the indicator light is on, it is recommended to clean the filter bag to use the suction machine to perform the best function.
8. The suction bag must be cleaned immediately after each use, so as not to affect the operation of the automatic suction machine due to excessive dirt in the filter bag during the next use.
9. When not working, please store the automatic suction machine in a cool and ventilated place indoors to avoid direct sunlight.
10. To prevent accidents, it is recommended to connect the car to the fixture on the side of the pool with the safety cord provided with the unit before use.
11. Non-professionals please do not disassemble the motor assembly and power control box of the swimming pool suction machine main unit to avoid danger and damage to the
pool cleaner.
Should you have more question, welcome to contact us: www.micpoolspa.com
email: info@micpoolspa.com call/whatsapp/wechat: 008618565368026
